• FP-2 Foot Pedal

    FP-2 Foot Pedal

    Read more
  • GCUT-40 Nh

    GCUT-40 Nh

    • 1). 110V/220V dual voltage can be optional.
    • Advanced (IGBT) inverter technology and Single PCB structure with high duty-cycle.
    • 2). Lightweight but powerful, it can easily clean cut 16mm, Max Severance 25m metal.
    • 3). Non-HF Interfere, Non-Touch Pilot Arc, 2T/4T, Air Check, dual displays show current and air pressure.
    • high-definition LCD 96*50MM.
    • 4). With Non-HF Pilot Arc function, Pilot arc will not interference to machine, safe and ideal for general use, friendly to the surrounding electrical machine and human health.
    • 5). Non-Touch Pilot Arc applicable for grid workpiece, minimize interference with electronics and help lengthen consumable life, better cutting quality and can efficiently cut through rough surfaces, rusty surfaces, even painted surfaces, and produce only minimal slag.
    • 6). Easy to cut thick metal plate in a fast and economical way.
    • 7). Widely used for cutting carbon steel, stainless steel, copper and aluminum, etc.
    Read more
  • GCUT-40 Pa

    GCUT-40 Pa

    • 1). 110V/220V dual voltage can be optional.
    • Advanced (IGBT) inverter technology and Single PCB structure with high duty-cycle.
    • 2). Lightweight but powerful, it can easily clean cut 12mm, Max Severance 16mm metal.
    • 3). HF, Non-Touch Pilot Arc, 2T/4T, Air Check, dual displays show current and air pressure,high-definition LCD 96*50MM.
    • 4). Non-Touch Pilot Arc applicable for grid workpiece, minimize interference with electronics and help lengthen consumable life, better cutting quality and can efficiently cut through rough surfaces, rusty surfaces, even painted surfaces, and produce only minimal slag.
    • 5). Built-in air regulator, safer and more convenient to operate.
    • 6). Easy to cut thick metal plate in a fast and economical way.
    • 7). Widely used for cutting carbon steel, stainless steel, copper and aluminum, etc.
    Read more
  • GCUT-40AIR

    GCUT-40AIR

    • 1). 110V/220V dual voltage can be optional.
    • Advanced (IGBT) inverter technology and Single PCB structure with high duty-cycle.
    • 2). Integrated into the machine design can make it very portable for carrying it outdoors.
    • 3). Built-in 450W pure copper compressor, Lightweight suitable for outdoor work but powerful,
    • easy to operate, stable output and quiet work. Easily clean cut 8mm, Max Severance 12mm metal.
    • 4). With external air compressor connect can supply more strong air pressure and easily clean cut 16mm,
    • Max Severance 25mm metal.
    • 5). HF or Non-HF can be optional, Non-Touch Pilot Arc, 2T/4T, Air Check, dual displays show current and air pressure.
    • 6). With Non-HF Pilot Arc function, Pilot arc will not interference to machine, safe and ideal for general use, friendly to the surrounding electrical machine and human health.
    • 7). Non-Touch Pilot Arc applicable for grid workpiece, minimize interference with electronics and help lengthen consumable life, better cutting quality and can efficiently cut through rough surfaces, rusty surfaces, even painted surfaces, and produce    only minimal slag.
    • 8). Built-in air regulator, safer and more convenient to operate.
    • 9). Easy to cut thick metal plate in a fast and economical way.
    • 10). Widely used for cutting carbon steel, stainless steel, copper and aluminum, etc.
    • 11). Standard 10mm thickness honeycomb box is safer to protect and transport.
    Read more
  • GMIG-140 MiNi

    GMIG-140 MiNi

    • 1). 110V/220V dual voltage can be optional.
    • Adopt advanced IGBT inverter and PWM technology, high-definition LCD 80*50MM.
    • 2). Synergic MIG/MMA (VRD can be ON/OFF)/Lift TIG functions.
    • 3). Suitable for flux cored gasless 0.8MM/0.9MM/1.0MM welding wire.
    • 4). With high-strength plastic All-around corner protection, innovative human engineering handle.
    • 5). One-Knob Synergic Adjustment & Wide Voltage, Built-in expert welding parameters as well as adopt voltage stepless regulation, only rotate the knob, the welders will automatically match the feeding speed, which make welding easier.
    • 6). Effective spatters control, improved penetration and better welding performance.
    Read more
  • GMIG-140e

    GMIG-140e

    • 1). 110V/220V dual voltage can be optional.
    • Adopt advanced IGBT inverter and PWM technology, high-definition LCD 90*60MM.
    • 2). Synergic MIG/MMA (VRD can be ON/OFF)/Lift TIG functions.
    • 3). Suitable for flux cored gasless 0.8MM/0.9MM/1.0MM welding wire.
    • 4). With high-strength plastic All-around corner protection, innovative human engineering handle.
    • 5). Synergic Adjustment & Wide Voltage, Built-in expert welding parameters as well as adopt voltage stepless regulation, only rotate the knob, the welders will automatically match the feeding speed, which make welding easier.
    • 6). Effective spatters control, improved penetration and better welding performance.
    • 7). 1Kgs spool holder with smallest lightest design. 
    Read more
  • GMIG-180 MiNi

    GMIG-180 MiNi

    • 1). 110V/220V dual voltage can be optional.
    • Adopt advanced IGBT inverter and PWM technology, high-definition LCD 80*50MM.
    • 2). Synergic MIG/MMA (VRD can ON/OFF)/Lift TIG functions.
    • 3). Easy to operate front cable connector to change polarity conversion, can suit solid wire (Gas welding) or
    • Flux wire (Gasless welding).
    • 4). With high-strength plastic All-around corner protection, innovative human engineering handle.
    • 5). One-Knob Synergic Adjustment & Wide Voltage, Built-in expert welding parameters as well as adopt voltage stepless regulation, only rotate the knob, the welders will automatically match the feeding speed, which make welding easier.
    • 6). Effective spatters control, improved penetration and better welding performance.
    • 7). 1Kgs spool holder with smallest lightest design. 
    Read more
  • GMIG-180e

    GMIG-180e

    • 1). 110V/220V dual voltage can be optional.
    • Adopt advanced IGBT inverter and PWM technology, high-definition LCD 90*60MM.
    • 2). Synergic MIG/MMA (VRD can ON/OFF)/Lift TIG functions.
    • 3). Easy to operate front cable connector to change polarity conversion, can suit solid wire (Gas welding) or
    • Flux wire (Gasless welding).
    • 4). With high-strength plastic All-around corner protection, innovative human engineering handle.
    • 5). One-Knob Synergic Adjustment & Wide Voltage, Built-in expert welding parameters as well as adopt voltage stepless regulation, only rotate the knob, the welders will automatically match the feeding speed, which make welding easier.
    • 6). Effective spatters control, improved penetration and better welding performance.
    • 7). 1Kgs spool holder with smallest lightest design.
    Read more
  • GMIG-200

    GMIG-200

    • 1), 110V/220V dual voltage can be optional. Adopt High performance 32-bit MCU and IGBT & advanced PWM technology.
    • 2), DC Gas MIG/MAG, Gasless MIG, Lift-TIG, MMA, Support Spool Gun and multi-process functions.
    • high-definition 135*85MM LCD.
    • 3), Compact, lightweight, Suitable for 1Kgs/5Kgs Wire. Inching wire function, easy to install wire.
    • 4), Outstanding welding performance, especially for thin plate welding, little weld spatter.
    • 5), Easy-to-user interface, Synergic Home Function, dynamic control Digital display with very simple operations.
    Read more
  • GMIG-200 DPulse

    GMIG-200 DPulse

    • 1), Adopt High performance 32-bit MCU digital technology and IGBT & advanced PWM inverter technology.
    • 2), DC synergic MIG, Single & Double Pulse MIG, Lift-TIG, Pulse TIG, MMA, Pulse MMA, spool Gun process.
    • adjustable inductance, 2T/4T, Spot welding time, burn-back, Pre & Post gas time, Pulse Frequency,
    • Duty Ratio, Pulse Width, Base & Peak Arc length, VRD, ARC force, hot start and other parameter.
    • 35 Channels customized Program Store to convenient for operating.
    • Support remote adjust wire speed & voltage MIG torch and machine can recognize torch automatically.
    • 5Kgs spool holder with Inching wire function, easy to install welding wire.
    • 3), Outstanding welding performance, especially for thin plate welding.
    •    Suitable for Carbon Steel, Flux, E308 E316 stainless steel, AlSi5, AlMg5 aluminum welding wire.
    •    Suitable for E6010, E6011 Cellulose electrode.
    • 4), Easy-to-user interface, Synergic Home Function automatically manages ideal voltage and wire feed speed while only adjusting welding current; dynamic control Digital display with very simple operations.
    • 5), Preset synergic database, with special aluminum sheet expert database.
    • 6), MIG welding voltage and wire speed also can be manual setting for skilled user.
    • 7), Unique housing design with high-strength nylon plastic, innovative human engineering handle.
    • 8), Premium 35-50MM2 cable connector, and easy to change polarity conversion,
    • can suit Solid wire (Gas welding) or Flux wire (Gasless welding).
    • 9), With Wide Voltage Function, work well and stable between voltage 150V-270V or together with Generator.
    • 10), Compact, little splash, Intelligent Protection, over-voltage, low-voltage, over-current, over-heat etc.
    • 11), Spool gun, Dual drive wire feeder can be optional.
    Read more
  • GMIG-200 DPulse

    GMIG-200 DPulse

    • 1), Adopt High performance 32-bit MCU digital technology and IGBT & advanced PWM inverter technology.
    • 2), DC synergic MIG, Single & Double Pulse MIG, Lift-TIG, Pulse TIG, MMA, Pulse MMA, spool Gun process.
    • adjustable inductance, 2T/4T, Spot welding time, burn-back, Pre & Post gas time, Pulse Frequency,
    • Duty Ratio, Pulse Width, Base & Peak Arc length, VRD, ARC force, hot start and other parameter.
    • 35 Channels customized Program Store to convenient for operating.
    • Support remote adjust wire speed & voltage MIG torch and machine can recognize torch automatically.
    • 5Kgs spool holder with Inching wire function, easy to install welding wire.
    • 3), Outstanding welding performance, especially for thin plate welding.
    •    Suitable for Carbon Steel, Flux, E308 E316 stainless steel, AlSi5, AlMg5 aluminum welding wire.
    •    Suitable for E6010, E6011 Cellulose electrode.
    • 4), Easy-to-user interface, Synergic Home Function automatically manages ideal voltage and wire feed speed while only adjusting welding current; dynamic control Digital display with very simple operations.
    • 5), Preset synergic database, with special aluminum sheet expert database.
    • 6), MIG welding voltage and wire speed also can be manual setting for skilled user.
    • 7), Unique housing design with high-strength nylon plastic, innovative human engineering handle.
    • 8), Premium 35-50MM2 cable connector, and easy to change polarity conversion,
    • can suit Solid wire (Gas welding) or Flux wire (Gasless welding).
    • 9), With Wide Voltage Function, work well and stable between voltage 150V-270V or together with Generator.
    • 10), Compact, little splash, Intelligent Protection, over-voltage, low-voltage, over-current, over-heat etc.
    • 11), Spool gun, Dual drive wire feeder can be optional.
    Read more
  • GMIG-200 Eco

    GMIG-200 Eco

    • 1). 110V/220V dual voltage can be optional.Adopt advanced IGBT inverter and PWM technology.
    • 2). Synergic MIG/Manual MIG/MMA (VRD can ON/OFF)/LIFT-TIG, 2T/4T and multi-process,
    • Built-in arc force and hot start, high-definition 96*50MM LCD.
    • 3). Preset synergic database: Argon+Co2 Mixed and 100% Co2 solid wire and Flux wire to choose.
    • 4). With Inductance regulation to control welding arc characteristic (from soft to hard).
    • 5). Unique steel housing with Innovative human engineering handle.
    • 6). Easy to operate front cable connector to change polarity conversion, can suit solid wire (Gas welding) or
    • Flux wire (Gasless welding).
    • 7). Digital display, effective spatters control, improved penetration and better welding performance.
    • 8). Suitable for 1Kgs/5Kgs Wire. Inching wire function, easy to install wire.
    Read more